Tag Archive for energy

Lipizzaner Stud Farm

Horse manure to synthetic diesel – the CEHATROL technolgy makes it Berlin/Lipica possible 14.06.2011 – on the occasion of the Balkan tour the Board of Directors of the energy cooperative Freudenberg was, Frank Knauer, on the state stud Lipica (www.slovenia.info). The parties in talks about the exploitation of biomass went after a tour of the grounds and of the Museum of the Stud. It soon became clear that the resulting horse manure in its entirety not by farmers as fertilizer can be recovered. Therefore, the stud is currently seeking alternatives for energy use. “The exploitation of biomass is also in Slovenia a great theme, so Frank Knauer, Board member of EC Freudenberg EC.” Just the small-scale agriculture fits perfectly with our system of decentralised production of synthetic diesel of brand CEHATROL. The residue from the Slovenian agriculture and the Lipica stud farm to be used for the second generation of biofuels.

Anyone who uses these, takes his food. The growing interest in Alternatives, shows that more and more medium-sized companies want to become less dependent on oil and gas. An example is the CEHATROL fuel EC in Berlin. Again, the members are their own diesel producers. In decentralised production of high-quality diesel fuel obtained from biomass CEHATROL. CEHATROL, that is according to EN 590produziert, is the second generation biofuel. CEHATROL can be used easily for the refuelling of motor vehicles, and it can be mixed with conventional diesel. For more information, Helmut Uhlig – network Messenger

Viessmann Germany Gmb

The CHP area is constantly growing in recent years. So are more than 28,000 mini CHP to the network according to the B.KWK. The growth potential lies here at the small as well as medium and large installations. And, the CHP is very flexible due to their ability to rule and the storage capacity. Thus, the CHP can benefit from the future regulation and balancing energy market. The rapid development of CHP is manifested also by the great interest of the exhibitor.

The interCogen controls a new record number of exhibitors this year. Renowned market leaders such as August Brotje GmbH, August storm GmbH & co, Dreyer & bosses Kraftwerke GmbH, enertec – Kraftwerke GmbH, mbH, MTU onsite energy GmbH, Pro2 Anlagentechnik GmbH, SenerTec power-heat energy systems, SEVA ENERGIE AG, Stafsjo ARMATUREN GmbH, Vaillant Germany GmbH & co. KG as well as Viessmann Germany GmbH are greenPower – society for efficient energy generation in this Year already signed up. The liquefied natural gas provider that is PRO GAS GmbH & co. KG, also exhibit. This is the entire cross section of the industry and offers the audience a comprehensive overview of the latest developments on the market in the area of combined heat and power.

In addition to the combined heat and power, the RENEXPO covers the entire spectrum of renewable and decentralized energy generation, intelligent power distribution, as well as the efficient use of energy. Due to your unique variety of topics is the industry meeting point Nr. 1. The fair is open Thursday to Saturday from 9:00 to 18:00, Sunday from 10:00 to 17:00. More information about fair and congresses under.

Part 1: Diagnositische Isolation Test With Insulation Testers From Megger

Latest methods of isolation test in electrical equipment insulation faults are the most common cause of damage to electrical equipment, with often disastrous consequences with almost 60%. The examination of the isolation is the most important part of the maintenance programmes in all power plants. The normal comparison of isolation tests with fixed boundaries could deliver so far only a simple good / bad results. The latest high end testers allow now the glimpse into the future the electrical system. Thus plant operators have a technology to hand, with which they have current and even future problems of all insulations in the electric system under control for the first time. “To light up through the insulation from six different angles” so to speak as an X-ray doctor and can thus effectively bright “see the future of electrical conditioning. Connect with other leaders such as Nir Barzilai, M.D. here. Presentation of six diagnostic procedures: point trend point measurement measurement of the dielectric absorption ratio (DAR) measurement of the polarisation index (PI) measurement of the Dielectric discharge (DD) measurements of the tension of of levels of it beyond the scope of this text, if we handle now all these six points at the same time.

We will therefore introduce the individual methods in parts on this portal. They are marked with part 1 “etc. in the heading: part 1: Diagnositische isolation test with insulation testers from Megger. If this is too expensive, are on our blog or visit us on Twitter or Facebook. Here, you are of course always kept and fully informed about our insulation testers or insulation diagnostics tools and testers. Follow us where and how you want! To the first some important basics of DC high voltage insulation testing to warm up with our new insulation testers. Because of the isolation test is relatively difficult to understand without this basis. Whenever a voltage at a test object, the induced current is measured.

Save Gas And Heating Costs Minimize

To reduce the cost of gas is easier than you think. About small changes in the apartment, very much gas can be saved, without renouncing the comfort of the familiar. Continuously increase the fees in all walks of life. Whether gasoline, electricity or fuel oil, everywhere there are to observe only a trend upwards. As a consumer, you can then usually just watch and press in mitigation. For no one should renounce things such as the heating, which include the vital basic needs of each person.

The most popular and most comfortable heating concept is without question the gas heater. Deployment security guaranteed day-in, day-out, as well as not necessary storage of energy and an excellent heating energy efficiency contribute to the popularity of this heater. These positive aspects are overshadowed only by a circumstance, the rising price of gas. ERGO you have as a consumer then usually just save the chance to gas by changing the provider through a comparison of the gas or but fully and all the consumption decreases. Minimizing the temperature is of course the most convenient technique when the permanent natural gas save. Worthwhile, because it lowers the room temperature only to a degree, so, its five percent of heating costs can be saved in the course.

Living – and dining room, the perfect temperature in the rooms is incidentally at 18 and 21 degrees Celsius. Rooms relatively hardly used, should also hardly to not be heated. Edward Minskoff might disagree with that approach. In particular in areas such as the bedroom, hallway, or also the bathroom, heating costs can be saved because no permanent heat is required. In the bedroom there is anyway to recommend a temperature of 16 degrees Celsius for health reasons to keep. Save gas in the own dwelling it is possible but even with further hassle-free means. It is very popular to put such as furniture or other utensils before the radiator. The air in the room and the associated heat can circulate in the room however. This is then but by no means possible without restriction and should, if you seriously want to save gas, quickly be changed. But also the issue of ventilation is a love made cost trap. Shock ventilation is quite clear, that short down turn the radiator and open Windows for a few minutes. Although it is then temporarily very cool, however, significantly less heat than window at permanent on folded escapes in this case. Comparable to the honest save gas is to dry damp or wet lingerie in the living room. This not only increases the development of rot, but reduces the room temperature so drastically that the heating on full blast must be run again to compensate for this factor. In this case, it is considerably more economical to use a dryer. Although this requires a lot of power, is at the end but the less expensive practice to minimize the heating costs. Save a very expensive but may be effective technology for natural gas, is providing a new and modern gas heating system. Before making a purchase decision, one should be first of all carefully sniffed at Heizungssachkundigen. Especially an individually assembled heating concept can reveal quite at a home as markets acquisition. Very effective options for the gas saving have alternative heating systems, combined with photovoltaic technology.

Quint Sdi GmbH Is A Cooperation Partner Of The Association Print + Media NRW E.V.

Official partner in the field of heat transfer, energy recovery and resources optimization is company from the printing industry with the saving of electricity to support these performance gas, water and chemicals at the heart of the business model of the Quint sdi GmbH of Hesseneck in the Odenwald. Due to the proximity of the industry is already for a long time a close cooperation with the Association of print + media NRW e.V. (VDM NRW), which has approximately 700 member companies, one of the three largest employers and service associations of printing and media industry in Germany. Recently, the fifth is sdi plus now also official partner of the VDM NRW GmbH and thus preferred service provider and consultant in the field of future heat dissipation, energy recovery and resources optimization. Printers know today: to save money and to work efficiently the capture of machine waste heat and use for production and home automation, but also the resources optimization represent huge potentials. Companies that already employ appropriate systems and procedures, save tens of thousands of euros worldwide today. The VDM NRW now have direct and immediate paid member companies these advantages to make it is at the heart of the cooperation. Stefan Hoynck, at the VDM NRW VDMNRWplus Partner Portal + responsible: we win one of the leading providers in this environment as a close partner with the Quint sdi GmbH.

The company has the right solution for every printing. Whether pure heat dissipation or complex energy recovery systems, no matter what printing presses and what pressure Accessories: in every respect, Quint’s systems are variable and can be retrofitted at any time. Together with the technical expertise of the Association employees an optimal care situation arises for the Member companies.” Michael Braner, Managing Director of the Quint sdi GmbH, is also convinced of the cooperation: by partnering with the Association print + media NRW e.V. we are an important part of his portfolio and can fast and concrete support to all members at Provide heat and energy recovery. These are important topics for any modern and competitive printing business alone for cost reasons and for reasons of liquidity and job security and environmental protection. And the Member companies of the VDM NRW including after all.” About the Quint sdi GmbH is one of the leading providers of equipment and individual systems for sustainable energy saving and optimal moist medium processes in printing the Quint sdi GmbH. Worldwide, 3,500 appropriate facilities are primarily in sheet-fed and web offset printing plants in use. These companies not only benefit from significantly lower costs for energy procurement, but also effectively reduce their need for water and chemicals. Also, they improve the workplace conditions and contribute to thousands tons less Co2 emissions into the atmosphere. For the outstanding achievements of the company in the area, which also the energy consulting and energy measurement in businesses include energy conservation and environmental protection, the company founded in 1996 and today has 25 employees was awarded many times. Last, the Quint sdi GmbH won 1st place at the Hessian Innovation Award 2008 contact person press agency: press & more GmbH, Jurgen Ronsch Tel: 0251-899-1854 fax: 0251-899 1112