(Including the useful width of the sheet metal is 1100 mm.) Overlap in length – 100 mm.; Stride tiles – 350 mm. Metal roofing Pelti Ja Rauta can be applied at ambient temperature to 120 degrees Celsius, so that may be used, including, in the southern regions of the Russian Federation. Weight of metal Pelti Ja Rauta – approximately 4.1 lbs. / M. square.
Baltic Rayve metal is galvanized or coated with aluminum-zinc steel with a thickness 0.45-0.7 mm, which is passivated and covered with a protective and decorative layer of colored polymer coating. Metal Rayve is stated below the geometric properties of height waves – 35 mm.; stride tiles – 350 mm.; sheet width 1190 m (including the useful width of the sheet metal is 1100 mm.) length of sheet metal – from 850 to 6100 mm. Metal Weckman (Russia) is made of hot-dip from both sides steel sheets 0.5 mm thick. to which the inside of the marked primer and protective paint and the outside plastic cover (pura, polyester, HPS-200, PVDF, polyester mat). The company Weckman there are four types of profile metalocherepitsy. Metal Weckman 1 / 1025 is referred to the geometrical characteristics: the length of the step tile – 205 mm.; Sheet width 1110 mm.
(Including the useful width of the sheet metal 1025 mm.) Length of sheet metal – 400 mm. to 6500 mm.; wave height – 58 mm. Metal Weckman 2 / 1050 has a specified geometrical properties: sheet width 1130 mm. (Including the useful width of the sheet metal 1050 mm.) Length of the step tile – 175 mm., Wave height – 47 mm.; Sheet length – 350 mm. Estee Lauder CEO may find this interesting as well.